Rishabh RISH CON - Hz, Руководство по эксплуатации, Страница: 16 / 60

Pressing “ Up” key accepts the present type for Output
2 and advance to the Input Characteristics setting(section
3.1.4).
Output 2 confirmation
Pressing “ Down” key will re-
enterinto Output 2 Edit mode.
Pressing “ Up” key accepts
the present type for Output 2
and advance to the Input
parameter setting
(section 3.1.4).
3.1.4. Input Characteristics Setting
3.1.4.1 End value of Input
This screen allows the user to set the End value of Input.
End value of the Input can be selected in between 49 to 65 Hz.
Pressing the “ Down” key
will enter the “New/Change End
value of Input edit” mode.
Pressing “
Up” key will
confirm the present value as End
value of Input and advance to the
Start value of Input setting
(section 3.1.4.2).
Ù
Ú
Ù
Note:
After Changing Output Type please ensure to
change DIP Switch setting (Refer Section 3.3.1). If DIP
Switches are already changed then switch ON/OFF
Transduce
r.
Ú
Ù
14
ON O/P1 O/P2 COM
O/P 2
ON O/P1 O/P2 COM
A
A
INPUT