Risecomm ZNLY-201, Руководство пользователя

Страница: 11 / 16

6
How to switch STA / AP mode, the specific switching steps are as follows:
1. Disconnect the power supply of the Smart Router;
2. Push the STA/AP button to the STA or AP end;
3. Restart Smart Router. If the button at the STA ends, Smart Router is STA mode. If the
button at the AP ends, Smart Router is AP mode.
CHAPTER 3 Hardware Setup and Getting Started
Connecting the Router
Figure 5 Connection
Select the connection type (Ethernet Cable OR Wi-Fi). Please do the following:
1. Connection the Smart Router and the computer
» If your computer has installed wire network card, connect your computer to the router
using an Ethernet cable.
» If your computer has installed Wireless network card, disconnect the Smart Router to
the computer, but you can connection the router to the
Local area network through an
Ethernet cable.
2. Connection the Smart Router power