Risecom Corporation R860, Руководство пользователя

Страница: 28 / 54

Chapter 4 BIOS Setup
R860
23
Manual Selecting annual lets you set the remaining fields on this
screen. Selects the type of fixed disk.
Auto (Default Value) BIOS automatically fills in the values for the cylinders, heads
and sectors fields.
None Any Disk Drives are attached
3. Access MODE
This field specifies the IDE translation mode.
CHS (Normal) Specifies traditional CHS addressing mode.
LARGE Specifies extended CHS translation mode.
LBA Specifies LBA translation mode
AUTO (Default Value) BIOS specifies translation method automatically
4. Capacity Auto Display you disk drive size.
5. Cylinders : Set the number of cylinders for this hard disk.
6. Head : Set the number of read/write heads.
7. Precomp : Set the value = 0.
8. Landing Zone : Set the value = cylinders number - 1
9. Sector : Set the number of sectors per track.
Video
EGA/VGA (Default) Specifies EGA or VGA adapter
CGA 40 Specifies CGA adapter with 40 column mode
CGA 80 Specifies CGA adapter with 80 column mode
MONO Specifies Monochrome adapter
Halt On
All Errors Each time the BIOS detects a non-fatal error, the system will
stop and display an error message
No Errors The system will stop for any errors that are detected
All, But Keyboard (Default) The system will stop for any errors except keyboard error
All, But Diskette The system will stop for any errors except diskette error
All, But Disk/Key The system will stop for any errors except diskette and key
board errors.