_________________________________
【
2
】
2. HARDWARE INSTALLATION
This chapter explains how to configure the system hardware.
Refer to this chapter whenever you upgrade or reconfigure your system.
2.1 Jumper Setting Summary :
Regarding hardware settings on the board. They specify configuration options
for various features. The settings are made using something called a "Jumper". A jumper is
a set of two or more metal pins in a plastic base attached to the mainboard. A plastic jumper
"cap" with a metal plate inside fits over two pins to create an electrical contact between them.
The contact establishes a hardware setting.
Some jumpers have two pins, other have three or more. The jumper are sometimes combined
into sets called jumper "blocks", where all the jumpers
in the block must be set together to establish a hardware setting.
The next figures show how this locks.
Jumpers and caps
Jumper cap 2-Pin Jumper 3-Pin Jumper Jumper block
______________________________________________________________
2-1
Содержание RS586 ALL-IN-ONE PC BOX
Страница 1: ...RS586 ALL IN ONE PC BOX USER s MANUAL ...