Rise R653, Руководство пользователя

Страница: 31 / 36

【 【 【 【
3
】 】 】 】
_________________________________
USB Controller Enabled or Disabled (default) USB function.
USB Keyboard Support Enabled or Disabled (default) USB Keyboard
Support. If USB Controller is set Enabled, this
item will present.
3. After you have finished with the Integrated Peripherals, press the <ESC>
key and follow the screen instructions to save or disregard your settings.
3.8 Supervisor Password
Base on the setting you made in the "security Option" of the "BIOS FEATURES
SETUP", This Main Menu item lets you configure the system so that a password
is required every time the system boots or an attempt is made to enter the
Setup program. Change the password as follows:
1. Choose "SUPERVISOR PASSWORD " in the Main Menu and Press <Enter>.
The following message appears:
"Enter Password:"
2. Enter a password and press <Enter>.
(If you do not wish to use the password function, you can just press <Enter> and
a "Password disabled" message appears.)
3. After you enter your password, the following message appears prompting you
to confirm the new passward:
"Confirm Password"
4. Re-enter your password and then Press <ESC> to exit to the Main Menu.
5. You have the right to change any changeable settings in the "COMS SETUP
UTILITY."
Important : If you forget or lose the password, the only way to access
the system is to set jumper JP38 to clear the CMOS RAM.
all setup information is lost and you must run the BIOS
setup program again.
__________________________________________________________________
3-14