CONTROl paNEl OpERaTiONS
1
direct to function
selection wheel:
on/off -
speakers -
source -
bluetooth -
mute / last track / play/pause / next track
mode selection
wheel:
audio mode
audio mode
(only available if the system detects a connected in.stream 2 audio station)
To select the audio mode, slide the left wheel up or down until the audio icon menu is highlighted in the middle.
In the Audio page you can access the following:
• in.stream 2 on/off
• audio source selector
• speaker calibration
• disconnect bluetooth
To select an item, slide the right wheel until the desired icon is highlighted in the middle.
on/off
speakers setting
audio source selector
disconnect bluetooth
turn in.stream 2 ON
(icon red)
Slide the right wheel until the power on/off icon
is highlighted in the middle. Press the icon at the
center of the screen to turn in.stream 2 on.
to modify your speaker settings
Slide the right wheel until the speaker calibration
icon is highlighted in the middle.
You can adjust:
• balance
• fade
• subwoofer
Use the sliders to change the speaker settings at
the desired level.
The fade and subwoofer sliders will only appear
on the screen if the corresponding speakers are
installed on the in.stream 2.
turn in.stream 2 OFF
(icon green)
Press the icon at the center of the screen to turn
in.stream 2 off.
to select an audio source
Slide the right wheel until the source icon is
highlighted in the middle.
In the menu list, the following sources are
available:
• Bluetooth
• FM
• USB
• Aux. 1
Simply select the desired one to use.
Note that only the sources installed on the
in.stream 2 will be displayed in the source menu.
Please note that the Play/Pause and Change
Track functions apply to devices using Bluetooth
technology and USB, and will not work when AUX
is selected as the source.
main display
Press Play / Pause to start or pause playback of
audio files.
Drag the volume slider to adjust the volume or tap
the mute button to mute or unmute sound.
Press the last track or next track buttons to go to
the previous song or skip to the next.
If a device with Bluetooth technology is connected
to the in.stream 2, you can disconnect it by
pressing the Disconnect key at the bottom of the
screen.
Doing so will also prevent the in.stream 2 from
automatically reconnecting to this specific device
until it has been reconnected using the device
itself.
19
