3. When moving forward and backward/
left and right flying stick to left or right,
then the quadcopter is flying to left or
right at the same time.
4. When moving forward and backward/
left and right flying stick to front or back,
then the is flying forward or backward
at quadcopter the same time.
5. Adjust left and right rudder trim
When taking off, the body head
drifts to left,then adjusts right
rudder trim, otherwise left
rudder trim.
6. Adjust forward and backward trim
When taking off, the body drifts
forward, then adjusts backward
trim, otherwise forward trim.
7. Left & right trimmer
When taking off,the body drifts
to left, then adjusts right trim,
otherwise left trim.
High/low speed mode
This quadcopter comes with high and low speed modes,press down the high
and low speed button in the transmitter, then LCD display screen will show
switch for MODE1 and MODE2.
MODE 1 (Low speed mode, suitable for beginner)
MODE 2 (High speed mode,suitable for RC enthusiast )
1. When quadcopter is flying in the air, press down the flip button in the lower
right corner of transmitter, then the quadcopter will flip 360 degrees.
(When quadcopter bottom light gets flashing, then it's not allowed to flip)
Flip:
Press This Button
2. When quadcopter is flying in the air, then left hand press down the flip mode
switch in the upper left corner of transmitter, then transmitter will sound
"DI, DI...", it shows that quadcopter is ready to flip. Use your right hand to push
the rudder stick to utmost, then release, the quadcopter will flip 360 degrees
to forward and backward or left and right side simultaneously. Meanwhile the
flip mode will automatically shut down.
Press This Button
Warning: enough room is need for this motion, or danger may occur.
Headless mode:
Press Headless Mode button, the LED light of drone goes off. This indicates
that Headless Mode is on.
Press the Headless Mode button again, the LED light of drone turns on. This
indicates that Headless Mode is off.
NOTE: When the drone is in Headless Mode, the head of drone must face
towards the front. While in Headless Mode, if the direction and angel of
drone is offset, you can exit from Headless Mode and then turn Headless
Mode on again. This will cause the direction and angel to reset to normal
status.
Press This Button
During normal flight, the head of the drone is towards the front. Pressing the
Headless Mode button, the LED light of the drone body turns off. This indicates
that Headless Mode is activated. There is no direction to distinguish the front
and back of the drone when flying.
7
8
