Page 4
VIS500 User Guide
Charging Status LED
Status Light
Changing the Inspection Tip
The Charging LED will display battery information when unplugged, or charging status when plugged in. When
unplugged a solid green light will be displayed when the device is above 30 percent battery. Below it will display a red
light and when critical begin blinking. When plugged in it will blink green when charging and stay solid green once fully
charged.
The status light is used to describe the connection status and the results of an analysis. When the unit first turns on
it will slowly blink blue to indicate that it is waiting for a connection. To connect to the device see the connection
instructions for your given platform. Once connected and in the application the light will turn solid blue indicating that it
is connected. From this point on Solid blue will be the standby color and will be displayed when the unit is ready to focus
and analyze. After any focus and analyze the LED will turn either Red to indicate a failed focus/ Failed fiber or green to
indicate a passing fiber.
To change the adapter tip simply hold the adapter still and rotate the adapter ring, replace the adapter then tighten the
ring back down.
