Ripley MILLER VIS300 Скачать руководство пользователя страница 7

Страница: 7 / 12

Page 7

VIS300 User Guide

Integration with Windows InSpec

InSpec is a free software package from Ripley offering saving, and reporting of pertinent fiber endface

images for fiber optic installations. This software is available for download at Ripley-tools.com/

download.

Connection

To connect the VIS300 to the windows inspec software first verify that you have the USB capable

variant of the VIS300. If you do simply connect the probe’s mini usb to the windows pc while running

the InSpec software. All required drivers will be installed when the software is installed.

Analyzing and saving a fiber with the InSpec Software

Once you connect the VIS300 the “Scope” tab will appear and you will see the screen below with a live

image of the fiber endface. At this point you should use the focusing ring to focus the endface image.

Next make sure you have the correct IEC-Spec is selected. To change your selected IEC-Spec press

“Settings”=>IEC-61300-05-35=> then your given fiber type (such as UPC, APC, MMPC etc). Finally

once the image is focused and the correct spec is chosen press the “Analyze” button to begin the

manual analysis process. Just follow the prompts to select the core, resize the zones, and assign a pass

fail value to the image.

Содержание MILLER VIS300












