Page 3
VIS300 User Guide
The VIS300 Fiber Inspection Scope is a low cost, and compact Inspection scope for manually verrifying compliance with
the IEC 61300-3-35 Specification. This document will serve as an overview of the major features and functions of the
device as well as instructions for use with the Windows InSpec software if you have the USB Variant. If you are looking for
an standalone automatic inspection system take a look at the VIS300C inspection system. Or if you are looking for a low
cost Automated inspection scope check out the VIS400.
Introduction
Screen
Live display of the fiber at
the end of the probe
Connector Adapter
The VIS300 comes with a
universal 2.5 adapter by
default, however additional
adapters are available and are
user replaceable.
Device Overview
Focus Ring
Spinning this ring clockwise
focuses toward the fiber while
counter clockwise moves
towards the users hand.
Din Connector
This cable connects the
probe to the monitor
Power Button
Pressing the Power Button
will turn on or off the unit
Brightness Controls
These buttons
alow you to dim
or brighten the
monitors image
Mini USB
If you have thet USb Variant
this lets you connect to the
desktop inspec software
