Rip curl Trestles Tide Watch, Инструкционный бюллетень

Страница: 7 / 73

7
ATS (Automatic Tide System) FUNCTIONS
ATS TIDE HEIGHT DIAL
This dial indicates the tide height, direction (i.e. whether rising or falling) and
the approximate time to the next high or low tide.
You need to score a tide chart from your local surf shop (or newspaper) to
initially set this dial.
To set the ATS Tide Height Dial...
....for quickest setting:
Make sure that your watch is on the correct time and
date prior to setting the tide height dial, then from your
tide chart calculate the tide height right now then;
1.Make sure your watch is completely dry; 2.Unscrew the crown (as described
in Screw Crown section); 3.Pull the crown out to point B; 4.Turn crown anti-
clockwise/towards you to set the height hand to the correct height (each black
marker denotes approximately half hour intervals)
....for the most accurate setting;
From your tide chart note the last high tide time then; 1.Make sure your watch
is completely dry; 2.Unscrew the crown (as described in Screw Crown section);
3.Pull crown out fully to point C; 4. Set the time to exactly the last high tide time
as shown on your chart; 5. Push back crown to point B (half way); 6. Turn crown
anticlockwise/towards you to turn the Tide Height hand to HIGH; 7. Carefully
pull crown out fully; 8. Turn the hands to reset the correct time (note that the
Tide Height hand automatically turns also); 9. Push back crown fully in to point
A; 10. Fully screw in crown (as described in Screw Crown section)
Note:
When adjusting your watch for daylight saving you will need to reset
your ATS Tide Height dial.