Rip curl Trestles Tide Watch, Инструкционный бюллетень

Страница: 26 / 73

26
RETURN TO NORMAL TIME
Push the MODE button 4 times. (The chronograph will continue to count up
even in normal time mode.)
SETTING LOCAL HIGH TIDE :
Note 1 : Setting local HIGH TIDE information is done inside the FT mode. You
must only use HIGH TIDE information. The HIGH TIDE information can be from
today or any other day, as long as the correct Year, Month, Date and Time is
programmed for that HIGH TIDE. You can use any local tide tables from your
surf shop or daily newspaper to find HIGH TIDE times. (Remember you must
complete each section of the programming within 30 seconds or the watch
will return to FT MODE and you will need to start again. So get your HIGH TIDE
information prior to starting.)
Note 2 : During Daylight Saving you must always set NT mode and local HIGH
TIDE information to Standard Time, (not in Daylight Saving Time), and DO NOT
add one hour to your Tide chart time. When setting is complete, push and
hold for 5 seconds the START/STOP button in NT mode to advance for DST. At
the end of DST push and hold the START/STOP button for 5 seconds again to
return to Standard Time.
• From NT mode push the MODE button four times.
• FT is displayed fifth box from the left, Month, Date,
Hour and Year are displayed.
• Hold down MODE for 3 seconds till “SET” appears in
the top right corner. The Year will also flash.
• Advance the Year of your chosen HIGH TIDE with
LAP/RESET till correct. (For quick advance hold in the
LAP/RESET button)
• Push START/STOP the Month will flash, advance the Month of your chosen
HIGH TIDE with LAP/RESET till correct.
• Push START/STOP the Date will flash, advance the Date of your chosen
HIGH TIDE with LAP/RESET till correct.
• Push START/STOP the Hour will flash, advance the Hour of your chosen
HIGH TIDE with LAP/RESET till correct in AM or PM.