Riotoro CR500 MID, Руководство по установке

Страница: 21 / 40

Chapter 2 Ready, Setup, Go 19
CR500 Mid-Tower Case
Attaching Cables
Connect the Front Panel Switches and LEDs
The CR500 front panel switches, LEDs, and USB ports have wire leads
that need to be attached to header pins the motherboard. Refer to your
motherboard manual to locate the proper motherboard header pins and
attach the cable connectors listed below.
Tips:
- The LED leads are marked positive (+) or negative (–) and must be connected
to the corresponding pins on the motherboard. The orientation of the switch
connectors does not matter.
- Use your motherboard manual to correctly identify the front I/O connectors.
USB 3.0
USB 2.0
HD AUDIO
POWER SW
RESET SW
HDD LED
POWER LED +
POWER LED -