Reading Techniques
The view finder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in
any direction for a good read.
*
Hold the scanner over the bar code, pull the trigger, and center the
aiming beam on the bar code.
*
The aiming beam is smaller when the scanner is closer to the code
and larger when it is farther from the code.
1D Symbologies On/OFF -1
ENABLE
Codabar
DISABLE
ENABLE
Code 39
DISABLE
ENABLE
Code 39
Full ASCII
DISABLE
ENABLE
Interleaved
2 of 5
DISABLE
3
ENABLE
NEC 2 of 5
DISABLE
1D Symbologies On/OFF -2
ENABLE
Straight 2 of 5
Industrial
DISABLE
ENABLE
Straight 2 of 5
IATA
DISABLE
ENABLE
Matrix
2 of 5
DISABLE
ENABLE
Code 128
DISABLE
ENABLE
GS1-128
DISABLE
ENABLE
UPC-A
DISABLE
ENABLE
UPC-E
DISABLE
ENABLE
Code 11
DISABLE
ENABLE
Code 93
DISABLE
1D Symbologies On/OFF -3
ENABLE
Telepen
DISABLE
ENABLE
GS1 DataBar
Omnidirectional
DISABLE
ENABLE
GS1 DataBar
Limited
DISABLE
ENABLE
GS1 DataBar
Expanded
DISABLE
ENABLE
MSI
DISABLE
ENABLE
Trioptic
Code
DISABLE
ENABLE
EAN-13
DISABLE
ENABLE
EAN-8
DISABLE
ENABLE
Code 32
DISABLE
*
If you are going to scan Code 32, Trioptic Code must be off.
