Rioned FLEXMATIC+, Руководство пользователя

Страница: 9 / 51

08/13 9
2 SECURITY
Be responsible for other people when you are working with this machine.
This manual contains instructions for fundamental conditions that must be followed by use and
maintenance of this machine.
That is why it is necessary that authorised and qualified personnel must read the user's manual and
the user’s manual must always be available with the machine. Near the general regulations in this
chapter, you must also follow the security regulations in the other chapters.
2.1 Instruction in-
dications in this
manual The in this manual containing security instructions, which are dangerous if they are not obeyed, are
marked with general security signs.
Security sign DIN 4844-W9
2.2 Descriptions se-
curity measures • Stop
This machine is equipped with an stop. By operating the emergency stop, the machine
will stop. Also use it when dangerous situations occur. After use, remove the danger.
Make sure the stop can always be reached.
• Security covers
This machine is equipped with several security covers over parts that are rotating. It is
forbidden to remove these security covers during operating this machine. You can only
remove them if there is maintenance on the machine. Stop the machine and take the plug
out of the wall socket.
• Spring guidance tube
The spring guidance tube protects you against the rotating spring. Now your clothes can
not get clamped between the spring openings.
2.3 Personnel pro-
tection outfit • Protection looking glasses
• Gloves (Recommended)
• Dust cover (Recommended)
2.4 Warnings Never take the spring when turning.
Do not let the spring turn outside ( swing of the spring).
Do not start the machine with switched in feed unit.
Take care of a stable disposition of the machine.
Never block the control lever, unless this is mentioned.
Do not wear cloth that hangs loose.
Please note safety instructions ( See Chapter 10.6 "Safety instructions" page: 47 ).
Dust that arises when working on material containing asbestos or stonework containing crystalline
silicic acid is harmful to the health. Please follow accident prevention regulations.
Do not pierce the motor housing as this could damage the double insulation (use adhesives).