Rion Eco Grow 6x6', Руководство по сборке

Страница: 4 / 27

Connect the specified parts.
Match the holes in the profiles and the connectors.
Place a pin on the pin tool and push the pin through the lined-up holes
to lock the parts in place. Many connections require pins on both sides.
Note:
Extra pins are included.
If you wish to disassemble the parts at any time, remove the pins using
the pin tool. Place the end into the exposed hole and lever the pin out.
If a hole in the connector is missing, drill a hole with a 6 mm
(¼") drill bit through the assembled profile and then insert the pin.
In extremely rare cases connectors will not slip into some round or
oval profiles. In this case place the affected part into10 cm (4”) of
boiling water for 15 seconds before connecting.
Important:
In order to maintain the life of your greenhouse, it is
essential to insert glazing elements fully and completely.
Moisten the glazing element with soapy water.
Insert one end of the glazing element into the profile until it snaps
into place.
Push the glazing element along its length.
Continue until the end of the glazing element snaps in place.
The callout ( ) shows an enlarged cross-section of the profile
and glazing element when it is seated correctly
Congratulations on purchasing an EcoGrow. We are certain that it will give you many happy years of pleasure in your garden.
EcoGrow has been designed to be as easy to put together as it is beautiful to look at.
Most of the work can be done by a single person. Only attaching the roof requires the help of a family member or
neighbor for a short while.
Easy assembly methods eliminate the need for tools or special expertise.
Greenhouse assembly is done in the following steps:
Prepare a Foundation for Your Greenhouse ------ 3
Identify Greenhouse Parts ----------------------------- 5
Prepare Your Parts for Assembly --------------------- 8
Lay Out the Greenhouse Frame ---------------------- 8
Secure the Frame to Foundation -------------------- 9
Assemble the Roof Pediments ----------------------- 10
Assemble Roof Framework ---------------------------- 12
Cover the Greenhouse Roof --------------------------- 13
Cover the Walls ------------------------------------------- 17
Raise the Roof --------------------------------------------- 18
Assemble the Door -------------------------------------- 20
Seal The Door --------------------------------------------- 21
Attach The Door ------------------------------------------ 22
Attach Door Holder -------------------------------------- 23
Final Touches --------------------------------------------- 24
Warranty ---------------------------------------------------- 25
Introduction
2