3. Inflate Spa
1) Place spa in suitable location
on a level surface next to the
Portable Control Unit
3) Connection ports:
A) Drainage Outlet Pipe
B) Inflation Port
C) Blower/Jet Massage Port
D) Heater Port
E) Filter Port
2) Connect the Inflation Hose
to the adapter on the
Portable Control Unit
and attach to spa Inflation
Port. Press the Massage
Button to inflate the spa
(A)
(B)
(D)
(C)
(E)
IMPORTANT: Ensure the spa
wall is inflated to the correct
height (29”)
2. Test GFCI & Inflate Lid
a) Perform GFCI Test
WARNING: RISK OF ELECTRIC SHOCK. The GFCI plug must
be tested before each use. Do not use if GFCI test fails.
1. Insert the plug into the power outlet.
2. Press the “RESET“ button, the indicator light turns red.
3. Press the “TEST” button, the indicator light turns off.
4. Press the “RESET” button, the indicator light turns red; the pump is ready to use.
1
2
3
4
b) Inflate the Lid
Before the lid is inflated ensure the Valve Stopper (A) is fully pushed in to avoid air leaking
out. Connect the Inflation Hose to the Inflation Port on the Portable Control Unit and then
connect the other end to the Inflation Port on the lid (B). Press the Massage Button (C) to
inflate the lid. Once inflated close the Valve Cap (D).
(A)
(B)
(C)
(D)
6
