D841/D850 Installation Manual
008D-600-150
Page 3
Traffic lights
Controlled by digital inputs or byte in supported protocol.
D841 - Dedicated Red and Green
Weight Display
Six (6) digits plus decimal point and annunciators or seven (7)
plus decimal point for text-based protocols. Weight readings,
setup information and errors will be shown. The decimal point will
be displayed between digits as two LEDs. The decimal point does
not affect number of digits displayed.
Units
Sticker to indicate the measurement units of the displayed
reading or shown with annunciators if configured.
Annunciators
Where the annunciators are supported in the protocol, there are
three annunciator conditions.
Notes:
o
Some protocols do not support all annunciators
o
Symbols are displayed directly or indicated using labels
Symbol
Name
Description
ZERO
Indicated when the indicator is displaying
Centre Of Zero.
NET
Indicated when the indicator shows NET
weight.
MOTION
Indicated when the indicator reading is
not stable.
Brightness Control
Adjustable 10 steps and Auto Detect. Full Brightness Default
Scrolling Messages
Available in D841 only using K802 Factory fit Firmware, up to 150
characters at slow/medium/fast rate
Approvals
FCC, CE, C-tick
NTEP Multi Zero
support
Multi zero support only applies to supported indicators and
protocols. If the division size is 1x or higher, when the weight
display returns to Zero, the D841/D850 will also display the
trailing zero.
Example: With the count set to 20, an indicator displays 00 at
zero load. The D841/D850 will also show 00 at zero as there is no
leading zero blanking.
NTEP is the National Type Evaluation Program in the US.
Optional
Accessories
D841 only
– D84x Weather Hood (DA002)
D841 only
– Pole mounting plate (RAM and VESA mounting
compatible) (DA003)
