6
|
Symmetry Maintenance Instructions: 11699-B 02-12 01-12
Dismantling the appliance
Before commencing any maintenance work, ensure the gas and power supplies to
the appliance are disconnected. Also read these instructions to get an overview of the
steps required before starting any maintenance work. There are a number of checks
that need to be performed as the appliance is dismantled.
IMPORTANT
1. Remove outer frame and lift off magnets.
2. Remove glass frame.
3. Remove log set.
4. Remove pilot shield.
5. Remove upper and lower brackets, and
unclip control switch.
6. Carefully lift out burner bed, hold as
shown.
7. Remove left and right ceramic panels (if
installed), and top panel.
8. Remove back ceramic panel (if installed).
