Rinnai REU-1110FFU(F)-E Скачать руководство пользователя страница 15

15 

 

IMPORTANT INFORMATION 

This appliance may only be installed by someone certified competent to do so. 
At the time of printing the only people deemed competent to install this appliance are those that are 

Gas Safe registered for this type of appliance in this type of location who have a current ACS certifi-
cate. 

1.

 

Gas  safety  (Installation  &  Use)  regulations  1998 

are the ‘Rules in force’. In your own interest and that of 

safety,  it  is  law  that  all  gas  appliances  are  installed  by  competent  persons  in  accordance  with  the  above 
regulations.  Failure  to  install  appliances  correctly  could  lead  to  prosecution.  Other  persons  should  NOT 
attempt to install this equipment.

 

2.

 

Building  Regulations  G3 

require installers of unvented systems to be competent to do so. Competence can 

be shown by holding a current certificate in Unvented Domestic Hot Water Systems. If the Infinity is installed 
in a flow and return, or tank system, or any other closed system then the system is unvented.

 

3.

 

Installation must be carried out in accordance with the current issue of the following:

 

 

Building  Regulations  issued  by  the  Department  of  the  Environment;  Building  Standards  (Scotland) 
Regulations; I.E.E. Wiring regulations for electrical installations; Gas safety (Installation and Use) Regulations 
current issue; BS 5546; BS 5440; BS 6891; BS 5482; BS 6700; BS 6644; Institute of Gas Engineers Publica-
tions; Local byelaws; Water regulations; Health and safety at work etc. Act 1974; IGE/UP/10 Part1 Edition 2; 
Building Regulation J; such other specifications and regulations that may supersede or complement the above 
documents.

 

Please be sure that you are fully aware of your obligations and responsibilities under these regulations. 
 
 
Disposal Information:

 

 

Under the laws and local regulations, this product must be disposed separately from household waste. When this 
product reaches the end of useful life, it should be taken to a collection point identified by the local authorities. 
The recycling of the product at the time of disposal will help conserve natural resources and ensure that it is recy-
cled in a manner that protects human health and environment. 

UK INSTALLATION INSTRUCTIONS 

 

 

After unpacking the appliance check for damage, if the heater is damaged or appears to 
have any defects contact your supplier immediately.

 

DO NOT install a damaged appliance before checking with your supplier. 

 

 

Check that the appliance supplied is the correct gas type for the installation. Refer to the 
data plate located on the side of the casing of the appliance.

 

 

 

A heater accessories pack is inside the carton.

 

 

 

Remove the accessories pack and the heater from the carton and check that all the parts 
are included.

 

 

 

 

 

Unit mounting fasteners 

UNPACKING RINNAI WATER HEATER 

Содержание REU-1110FFU(F)-E













































Отзывы: