1.5 V D.C (”C” size battery)
Gas inlet
Battery box
COMPONENTS AND PART NAMES
For the best results from your Rinnai gas cooker, please read the instruction
give below carefully prior to operate the unit.
- 1 -
- 6 -
Fig. 1
Pan support H
Burner head S
Burner head H
Burner body H
Top plate
Casing
Knob
Drip pan H
Pan support M
Drip pan M
Burner body M
Burner head M
SAFETY MARK ON GLASS TOP PLATE
•
Never use oversized cooking
utensils or overload the cooking
appliances.
•
Do not place the cooker pan
over the pan support side as
it can cause turnbling. Never
use oversized cooking utensils
or overload the cooking appliances.
•
Do not remove the pan support
and enclose the burner with a wok
stand as this will concentrate and
deflect the heat onto the gas hob.
•
Do not place anything,e.g., flame tamer, asbestos mat between pan and pan
support as serious damage to appliace may result.
•
Place the supporting trivets of
the gas hob or cooker pan in the
correct position.
MAINTENANCE
* Wipe the top plate with a soft, damp cloth, and mild detergent regularly, should not
keep glass top plate too dirty because stains will affect the quality of glass surface.
* Wash the pan supports and drip pan, in warm water and detergent.
* In order to avoid dangerous situation arising from
breakage of glass, do not apply heavy weight or
strong impact on glass top plate (Fig.9)
Fig.9
Fault
1. No ignition
2. Flame cannot be
held
3. No main flame
4.Yellow flame
5. Unstable flame
Cause
Remady
Spark electrode is wet especially in high
humidity season
Incorrect turning of gas control knob.
3.1 Gas meter cock and/or appliance
isolating cock have been turned off.
3.2 Burner head is blocked by
aluminium foil.
Accumulated grease and dirt on burner
head.
Incorrect location of burner head.
Dry the electrode with clean tissue
or dry cloth.
Open gas meter cock and/or
appliance isolating cock completely.
Remove aluminium foil.
Wash burner head warm water with
detergent. Leave it on dry and place
back in correct position.
Refit burner head into burner body.
TROUBLE SHOOTING MANUAL FOR RINNAI
Push and turn gas control knob
anti-clockwise until a “click”
sound is heard. Hold for a few
second until flame is ignited
