Rinnai RB-3002H-CB, Руководство по эксплуатации и установке

Страница: 11 / 14

9
Safety feature
Pan sensor
Each cooking zone is equipped with a pan sensor. The
cooking zone emits heat only when a suitable cookware
is placed on it. The display shows “-“ and gives a signal
sound every 2 seconds if:-

The cookware is incompatible for induction cooking

The base diameter of cookware is too small

The cookware is not centrally placed in the cooking
zone
The hob switches to ‘standby mode’ after 2 minutes.
Automatic switch off
This hob is equipped with a safety switch which
automatically switches off the cooking zones after they
have been in
continuous operation at different power
levels.
Suppose the front cooking zone is set to level 8, the
cooking zone will switch off after 2 hours of continuous
operation, while the back cooking zone set to level 2 will
switch off after 6 hours of continuous operation.
Power levels Cooking zone
switches off after
1,2,3 6 hours
4,5,6 4 hours
7,8,9 2 hours
Overheating protection
(for RB-3002H-CB only)
A sensor monitors the temperature in the cooking zone. If
the electronic elements overheat, the hob switches off
automatically and “E” appears on the display. No
functions can be activated. The display “E” goes off when
the electronic elements had cooled down sufficiently. The
hob is safe and ready for use.

Always place cookware on the cooking zone before
switching on the appliance.

Take care to keep the control panel clean and
never place hot pans on the control sensors. The
electronic unit beneath it could get damaged.
Useful Tip
En
gl
ish