6
Rinnai New Zealand
Infi nity Solar 20 & 24 Op / Install: 02-08
Installation, Commissioning & Maintenance
Rinnai continuous fl ow models REU-VE2015WS (Infi nity Solar 20) and REU-
V2422WS (Infi nity Solar 24) are specifi cally designed for installation as gas
boosters in solar hot water systems. They are not suitable for use in any other
applications.
Important
Models REU-VE2015WS and REU-V2422WS are factory preset to deliver 75
o
C. This
temperature must not be altered. Local regulations and/or the requirements of the AS/NZS
3500.4 must be considered regarding the temperature limitations to areas primarily used for
personal hygiene. Refer to the above mentioned publications for more information.
A pouch behind the front cover of the continuous fl ow models REU-VE2015WS and REU-
V2422WS contains gas pressure setting and diagnostics information for these appliances. This
information must be read in conjunction with the relevant solar system Installation / Operation
manual. This gas pressure setting and diagnostics information is usually not required during
installation.
Installation, commissioning, service and maintenance by an authorised person
only.
Do not attempt to install any solar hot water system components (including
the gas booster) without fi rst studying the relevant Rinnai and regulatory
publications.
Important
