Rinnai EX1 7 DT Скачать руководство пользователя | Manualshive

Страница: 55 / 56

background image

EX17DT and EX22DT Installation and Operation Manual

55

What Is Not Covered?

This Limited Warranty does not cover any failures or operating difficulties due to the following:



Accident, abuse, or misuse



Alteration of the product or any component part



Misapplication of this product



Force majeure



Improper installation (such as but not limited to, condensate damage, improper venting,

Incorrect gas type, or incorrect gas pressure)



Improper conversion (including conversions for inventory adjustment)



Improper maintenance (such as but not limited to vent blockage)



Incorrect sizing



Any other cause not due to defects in materials or workmanship

This Limited Warranty does not apply to any product whose serial number or manufacture date has
been defaced.

Limitation on Warranties

No one is authorized to make any other warranties on behalf of Rinnai America Corporation. Except
as expressly provided herein, there are no other warranties, expressed or implied, including, but not
limited to warranties of merchantability or fitness for a particular purpose, which extend beyond the
description of the warranty herein.

Any implied warranties of merchantability and fitness arising under state law are limited in duration to
the period of coverage provided by this Limited Warranty, unless the period provided by state law is
less. Some states do not allow limitations on how long an implied Limited

Warranty lasts, so the

above limitation may not apply to you.

Rinnai shall not be liable for indirect, incidental, special, consequential or other similar damages that
may arise, including lost profits, damage to person or property, loss of use, inconvenience, or liability
arising from improper installation, service or use. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation may not apply to you.

This Limited

Warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

www.rinnai.us/warranty

«
...
53
54
55
56
»

Содержание EX1 7 DT

























































Отзывы:

Нет отзывов

Похожие инструкции для EX1 7 DT

Бренд: Evcon Страницы: 28

Бренд: Bryant Страницы: 2

Бренд: Bryant Страницы: 8

Бренд: Payne Страницы: 22

Бренд: Fire Chief Страницы: 30

Бренд: Rinnai Страницы: 60

EX38CT RHFE-1005FTA2

Бренд: Rinnai Страницы: 88

GE APPLIANCES NF96US

Бренд: Haier Страницы: 60

calidia sintec 770

Бренд: whitepeaks Страницы: 28

Бренд: ICP Страницы: 26

Бренд: Haier Страницы: 53

AUTOMATIC IGNITION FURNACES

Бренд: Unitary products group Страницы: 8

Бренд: KeepRite Страницы: 72

Бренд: ICP Страницы: 16

Бренд: York Страницы: 4

Бренд: York Страницы: 8

Бренд: St. Croix Страницы: 57

Бренд: St. Croix Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды