Rinnai BC-100V Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 20

Rinnai BC-100V Скачать руководство пользователя страница 4

Rinnai

4

HW_CF_DELUXE OIM

WARNING

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

�

Always comply with the following precautions to avoid dangerous situations and to ensure

optimum performance�
Failure to carefully read and follow all instructions in this manual can result in equipment

malfunction, property damage, personal injury and/or death�

DANGER:

Indicates an imminently hazardous situation which, if not avoided, will result in

personal injury or death�

WARNINGS:

Indicates a potentially hazardous situation which, if not avoided, could result in

personal injury or death�

CAUTIONS:

Indicates a potentially hazardous situation which, if not avoided, could result in

minor or moderate injury or damage to the appliance� It may also be used to alert against unsafe

practices�

WARNING

REGULATORY INFORMATION

Controllers and water heaters must be installed correctly by an authorised person�
The installation of gas, water, and electricity must conform to local regulations, including local

OH&S requirements

.

The installation must also comply with the instructions supplied by Rinnai�
Please keep this instruction booklet in a safe place for future reference�

All dimensions referred to in these instructions are in millimetres, unless otherwise specified.

WARNING

WARNING ABOUT HOT WATER

Hot water can cause scalding� Those most

at risk are children and disabled, elderly

and infirm persons. (65°C water can

severely burn a child in half a second)�
Rinnai have water heater models which

limit the delivery temperature to 50°C

which significantly reduces the scald

hazard� Temperature limiting devices may

also be able to be fitted. Contact Rinnai for

further information�

ALWAYS

test the water temperature

before use, such as when filling a bath or

basin or entering a shower, to ensure it

is suitable for the application and will not

cause scald injury�

ALWAYS

supervise children whenever

they are in the bathroom or near other

sources of hot water� Ensure any hot water

taps are closed firmly after use.

WARNINGS & IMPORTANT INFORMATION

«
...
2
3
4
5
6
...
»

Содержание BC-100V





















Отзывы:

Нет отзывов