
Rinnai Australia
9
RCE-470/670 TRE
A dedicated 240v 10 Amp power point must
be used with this appliance.
Do not use power boards or double adaptors
to operate this appliance.
Heater must not be located below a power
socket-outlet.
Heat emanating from the front of this
appliance may over time affect the
appearance of some materials used for
flooring such as carpet, vinyl, cork or timber.
This effect may be amplified if the air in the
room contains cooking vapours or cigarette
smoke. To avoid this possibility, it is
recommended that a mat be placed in front of
the appliance, extending at least 750 mm in
front of it.
During peak operating periods the filters
should be cleaned weekly, however if the
“FILTER” warning indicator flashes in the
control panel display, turn off the appliance
immediately and clean filters before further
use.
When the heater is operated for the first time
or after long periods of non use a slight odour
may be emitted, this is normal.
However if odours persist switch of the
appliance and contact Rinnai.
IMPORTANT POINTS
Содержание Avenger 25 Plus
Страница 4: ...Rinnai Australia 1 RCE 470 670 TRE STANDBY ON BUTTON ABOUT YOUR NEW AVENGER CAPELLA Plus...
Страница 5: ...Rinnai Australia 2 RCE 470 670 TRE STA N D B Y ON S TA N D B Y ON button CONTROL PANEL LAYOUT...
Страница 17: ...Rinnai Australia 14 RCE 470 670 TRE SETTING HEATER MODES...
Страница 26: ...Rinnai Australia 23 RCE 470 670 TRE DIMENSIONS SPECIFICATIONS 202 203 610 570 243 Dimensions in mm...