Installation and Operating Instructions for Brake
EV/EH 018/024/028/038 EFM,
Electromagnetically activated- Spring released
E 09.770e
issue: 25.08.2021
version: 2
drawn.: MAYA
checked.: EISF pages: 20
page: 7
Prior to installation, check to ensure that the mounting surface is even and planned run between
the brake disc and the mounting surface is within the tolerance range of 0.2 mm. Check the axial
movement of the brake disc. Axial movement must not exceed ± 0.2 mm. Maximum permissible
lateral brake disc wobble is 0.1 mm. Greater wobble may cause rattling and shaking of the brake
unit.
Attention!
Check to ensure that the brake disc rotates freely.
8.3 Adjust the brake to the brake disc thickness and mount the brake
The brake is delivered with a distance between the friction pads of 13,1 mm or 25,6 mm. You can
adjust the distance between the friction pads with the setting screw Pos. 17 and Pos. 41 (see Fig.
8.1 or Fig. 8.2). The adjustment of the air gap between the friction pads and the brake disc is the
same as the adjustment of the brake disc thickness. You can adjust the air gap with the setting
screw Pos. 17 and Pos. 41 (see Fig. 8.1 or Fig. 8.2). The air gap between the friction pad and the
brake disc should be
0,3 mm
. During installation, ensure that the brake pads are centred and in
full contact with the surface of the brake disc. For the distance X and Z see table 8.1 or 8.2. See
also Fig. 8.1 or 8.2. The brake can be hold in position with a lifting belt for the multiple installation
positions.
Type
EV018..
EV024..
EV028..
EV038..
Distance X
48 mm
64,5mm
79 mm
103 mm
Distance Z
24,5 mm
19 mm
20 mm
27 mm
Rubbing surface Y
42 mm
47 mm
62 mm
72 mm
Tab. 8.1
Tab. 8.2
Type
EH018..
EH024..
EH028..
EH038..
Distance X
60,5 mm
84,5 mm
99 mm
126 mm
Distance Z
24,5 mm
19 mm
22 mm
29,5 mm
Rubbing surface Y
42 mm
47 mm
62 mm
72 mm
Fig. 8.1
EV …
