Maintenance/Repair
21/36
Pos : 10.26. 1 / 9 Wart ung/ Ins tandsetzung/RI /Übersc hrift: Aus bau der Abs augt urbi ne @ 0\ mod_1269597671546_131. doc x @ 3779 @ 2 @ 1
9.4
Disassembly of the suction turbine
Pos : 10.26. 2 / 1 Grundlegende Sic her hei tshi nweise/ Signal wort-F eld " War nung" @ 0\ mod_1261404807286_131. doc x @ 893 @ @ 1
WARNING
Pos : 10.26. 3 / 9 Wart ung/ Ins tandsetzung/ Warnt ext El ektr of achkr af t @ 0 \ mod_1264055838943_131.doc x @ 1680 @ @ 1
•
These works may only be carried out by an electrician.
Pos : 10.26. 4 / 9 Wart ung/ Ins tandsetzung/ Arbeiten an der T urbi ne O berfläc hentemper at ur @ 6\ mod_1401954130950_131.doc x @ 60471 @ @ 1
• Before any work near or at the extraction turbine, let its surface cool down to below 50°C or wear
safety gloves and work protection clothing that isolate against the arising temperatures.
Pos : 10.26. 5 / 1 Grundlegende Sic her hei tshi nweise/ Hinweis N etzs tec ker zi ehen @ 0\ mod_1261407392098_131.doc x @ 939 @ @ 1
Before starting work
remove the plug from the wall socket!
Pos : 10.26. 6 / 9 Wart ung/ Ins tandsetzung/R A/Skizze Aus bau T ur bine R A 51 @ 5\ mod_1382539965021_0.doc x @ 47275 @ @ 1
Pos : 10.26. 7 / 9 Wart ung/ Ins tandsetzung/R A/Aus bau Tur bine R A 51 @ 5\ mod_1382540052129_131. doc x @ 47285 @ @ 1
1. Switch off the motor and disconnect the power supply
2. Loosen screws
3. Remove hood
4. Remove muffling hose from the suction turbine
5. Remove bend with bypass valve
6. Disconnect electrical connection at motor
7. Loosen 3x nuts at base plate bottom
8. Remove turbine upwards by lifting gear/crane
Assembly is performed in the opposite order.
