ring Spotlight Cam, Руководство по установке и настройке

Страница: 23 / 27

Upgrade a Floodlight
If you have an existing motion detecting
floodlight, you can replace its motion
sensor with your Spotlight Cam for a
massive upgrade!
To do so, disconnect the wires
connected to the motion detector.
Then, unscrew and remove the motion
sensor from the floodlight and replace
it with the included wiring harness.
With the floodlight in its normal install
position, make sure that the lock-
shaped symbols on the wiring harness
face up (for wall mounting) or toward
you (for eaves mounting).
Then, wire it in, following this diagram.
For LED floodlight, connect the red
wire from your Spotlight Cam to the
black wire on the LED driver circuit, then
connect white to white.
Total power draw of connected
lights must not exceed 150 watts.
45 44