9
SETTINGS
Resolution
Set the resolution for the dash cam to record footage at. The higher resolution provides
clearer image (recommended) the lower resolution creates smaller recording file sizes.
Loop Recording
The dash cam has the option to save recordings on a loop of 3 or 5 minutes. The dash
cam will overwrite the oldest files saved to the MicroSD card to remove the requirement to
manually clear the memory space.
Date Stamp
The video recording can have the date and time at the point of filming stamped on the bottom
of the recording.
G-Sensor
G Sensor sensitivity can be adjusted. This is what detects forces which will automatically
protect the current recording in a collision.
The default setting for this will be set to medium sensitivity.
Parking Mode
During the case of a bump or knock whilst vehicle is parked, the dash cam can turn itself on
for 30 seconds to record the incident if this setting is activated in the settings (default OFF).
License Plate
The video recording can have licence plate stamped on the bottom of the recording.
To enable this enter the registration of the vehicle in the dash cam settings.
Protect File
Saved recordings can be locked manually to prevent them being over written by the loop
recording by using the Protect File setting.
Screen Saver
This setting allows you to switch the screen off when not required (default 30 Second timer).
Device Sounds
Buttons presses cause and sound to activate confirming the actuation. This be turned off in
the settings to make operation silent.
Language
The default language for the dash cam is English but can be changed to 10 others found in
the language settings.
