ring Retrofit Alarm Kit, Руководство пользователя, Страница: 6 / 20

6
You should also know
Ring Alarm Required. You need to have a Ring Alarm Base Station set up at
your location before you begin to add the Retrofit Alarm Kit and connect it to
your wired contact sensor zones. Your Ring Alarm Base Station will need to be
connected to the internet via Wi-Fi or ethernet, and cannot be on cellular backup
during installation.
Compatibility. To see if the Ring Retrofit Alarm Kit will work with the contact
sensor zones wired to your alarm panel, you’ll need to verify the resistance
on your zones. Check your alarm panel and documentation to confirm
compatibilibty.
The Ring Retrofit Alarm Kit design supports a maximum resistance of up to
5200 ohms under all conditions of temperature, battery, etc, with or without
end of line resistors. This is intended to tolerate 4.7K, 1K or 2K end of line
resistors commonly found in wired systems.
Add Up to 8 Zones at a Time. You can wire up to 8 zones with one Retrofit Alarm
Kit. If you have more than 8 zones, you can add additional Retrofit Alarm Kit
devices to the same Ring Alarm.
Document Everything. If you need assistance from Ring Support, having
documentation in the form of photographs and notes will help them identify any
issues faster and help you resolve them.
The Retrofit Alarm Kit is designed for residential use. It is not designed to
work with large commercial security systems.