ring Pro 2, Руководство пользователя, Страница: 6 / 13

10 9
Place your Access Controller.
Remove the liner from one side of the adhesive strips
and place the strips in the recesses on the back of your
access controller. Clean the surface where the access
controller will be placed. Peel the liner off of the other
side and place the Access Controller against the clean
and dry mounting surface for 30 seconds.
If you’re mounting outside your call box, drill a hole for
the antenna and terminal block wires. Pass the wires and
terminal block through the hole.
Connect the terminal block to your
Access Controller.
Plug the terminal block connector into the mating
connector on your Access Controller.