ring Pro 2, Руководство пользователя, Страница: 10 / 13

IMPORTANT PRODUCT INFORMATION
This device should only be installed by a professional installer or licensed electrician.
SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Users are required to use a power supply that complies with PS2 or L.P.S. certification and
approval. Use only accessories supplied with your device, or specifically marketed for use
with your device, to power your device. Use of third-party accessories may impact your
device’s performance. In limited circumstances, use of third-party accessories may void
your device’s limited warranty. In addition, use of incompatible third party accessories may
cause damage to your device or the third-party accessory. Read all safety instructions for any
accessories before using with your device.
Protect the device from direct sunlight. Install the device at dry locations and protect it
against rain and humidity. The device may not get contact to salt water or other conductive
liquids. The device must be charged only within a building in a dry state.
SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS
COULD RESULT IN INJURY.
Small parts contained in the Access Controller Pro 2 may present a choking hazard to small
children. Keep small parts away from children. Your Ring Access Controller Pro 2 should only
be used in accordance with the instructions and intended purpose. Using this accessory in
any way other than its intended purpose could cause injury to yourself, others or damage
to the device. Your Ring Ring Access Controller Pro 2 is not waterproof and as such should
not be submerged in water, doing so could cause injury to yourself, others or damage to
the device.
DANGER — TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, FOLLOW THESE
INSTRUCTIONS CAREFULLY.
• Do not force the adapter into a power outlet.
• Do not expose your device or adapter to liquids. If your device or adapter gets wet,
carefully unplug all cables without getting your hands wet and wait for the device and
adapter to dry completely before plugging them in again. Do not attempt to dry your
device or adapter with an external heat source, such as a microwave oven or a hair dryer.
If the device or adapter appear damaged, discontinue use immediately. Use only acces-
sories supplied with the device to power your device. To avoid risk of electric shock, do
not touch your device or any wires connected to your device during a lightning storm.
• If the adapter or cable appears damaged, discontinue use immediately.
Install your power adapter into an easily accessible socket-outlet located near the equipment
that will be plugged into or powered by the adapter.
Product Specifications
Model No.: ecBAC-1
Temperature Rating: -20°C to 65°C
Power Input: 100–240V ~0.3A 50/60Hz
Power Output: 5.2V, 1.8A (9 watts)
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose
of, or recycle, your device in accordance with your local laws and regulations. For infor-
mation about recycling your device, go to amazon.com/devicesupport .
TERMS OF SERVICE AND WARRANTY
By purchasing or using the product, you agree to the Terms of Service found at
ring.com/terms .
For information on our warranty, visit ring.com/legal .
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-