ring Motion Detector 2nd Generation Z-Wave, Руководство пользователя

Страница: 8 / 11

8
Parameter
Number
Description
Number
of
Bytes
Default Min Max Format
1
Heartbeats:
This parameter is the number min-
utes between heartbeats. Heart-
beats are automatic battery reports
on a timer after the last event.
1 70 (0x46) 1 (0x01) 70 (0x46)
0x01
Unsigned
2
Number of application level retries
attempted for messages either not
ACKed or messages encapsulated
via supervision get that did not
receive a report.
1 1 (0x01) 0 (0x00) 5 (0x05)
0x01
Unsigned
3
Application Level Retry Base Wait
Time Period: The number base
seconds used in the calculation for
sleeping between retry messages.
1 5 (0x05) 1 (0x01) 60 (0x3C)
0x01
Unsigned
4
This parameter allows a user, via
software, to configure the various
LED indications on the device.
0 == Don’t show green
1 == Show green after Supervision
Report Intrusion (Fault)
2 == Show green after Supervision
Report both Intrusion and Intrusion
clear
1 1 (0x01) 0 (0x00) 2 (0x01) enum
5
The number of milliseconds
waiting for a Supervisory Report
response to a Supervisory Get
encapsulated command from the
sensor before attempting a retry.
2
1500
(0x5DC)
500 (0x1F4) 5000
(0x1388)
0x01
Unsigned
6 Occupancy Clear Delay (seconds) 2 0x00 0x00 0xFF
0x01
Unsigned
7 Intrusion Clear Delay (seconds) 1 0x05 0x00 0xFF
0x01
Unsigned
8 Standard Clear Delay (seconds) 1 0x0A 0x00 0xFF
0x01
Unsigned
9 Motion Detection Mode 1 0x03 0x00 0x04
0x01
Unsigned
10 Any motion Threshold 1 0x80 0x00 0xFF
0x01
Unsigned
11 Lighting Enabled 1 0x00 0x00 0x01
0x01
Unsigned
12 Lighting Delay 1 0x02 0x00 0x3C
0x01
Unsigned
Configuration Command Class
The sensor has the following supported configuration parameters.