ring Motion Detector 2nd Generation Z-Wave, Руководство пользователя

Страница: 3 / 11

3
Installation & Set Up
Ring Alarm Motion Detector – Basic Setup & Installation
In-app Setup
1. Ensure your Ring Alarm system is disarmed.
2. In the Ring app, tap Set Up a Device and find the Motion Detector in the Security Devices menu.
3. Follow the in-app instructions to complete setup.
a. Pull the battery tab (or reinsert the batteries) to trigger setup mode.
b. Tap the button on the front to retry setup mode.
Installation
1. Choose a location for installing your Motion Detector.
a. For best coverage, install the Motion Detector at a height of between 7-8 feet
b. It is recommended to install the Motion Detector on a wall or in a corner looking out onto an
area to monitor.
c. Ensure no large objects block the field of view (FOV) of the Motion Detector.
2. Ensure the surface where you plan to install your Motion Detector is clean and free from dust or dirt.
3. Using the provided double-sided tape, peel the backing and attach the Motion Detector to the
mounting location.
Note
Leave ~ ½ in. of space free on the top side to ensure you can slide open the case when it’s time to
change the batteries.
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor
to increase reliability of the network.
This is a SmartStart enabled product which can be added into a Z-Wave network by scanning the
Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further
action is required and the SmartStart product will be added automatically within 10 minutes of being
switched on in the network vicinity. This product can also be operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturers.
Z-Wave Instructions
Z-Wave Device Type: Notification Sensor
Role Type: Listening Sleeping Slave
GENERIC_TYPE_SENSOR_NOTIFICATION (0x07)
SPECIFIC_TYPE_NOTIFICATION_SENSOR (0x01)