ring DNA100, Руководство пользователя, Страница: 8 / 27

June 2017 Digital Network Adapter DNA100
Setting Baud Rate / Selecting Device Type (For switch locations see Figure C3 .)
DIP switches SW3-1 through SW3-6 are used to set the desired baud rate for the RS232 device. SW3-7 and
SW3-8 are used to select the RS232 device the DNA100 is driving (see chart below).
BAUD
RATE
SW3
DEVICE
SW3
1 2 3 4 5 6 7 8
19200 1 0 0 0 0 1 Terminal 0 0
9600 1 0 0 0 1 0 0 = off Printer 0 1
4800 0 1 0 0 0 1 1 = on Not used 1 0
2400 0 1 0 0 1 0 Not used 1 1
1200 1 0 0 0 1 1
Communication Protocols
The DNA100 use No Parity, 8 Data Bits, and 1 Stop Bit.
Hardware flow control is used.
The DNA100 will send data only if CTS is high from the other device.
The DNA100 will turn RTS high when ready to receive.
Compatible emulation software:
Terminal for Windows:
Set Terminal emulation to VT100
Set software flow control to OFF and hardware flow control to ON.
Set Pace character to
>
Hyper Terminal for Windows
Set Terminal emulation to ANSI
Set hardware flow control.
Select terminal for function, arrow and ctrl keys.
Realterm
Set Terminal emulation to ANSI
Set hardware flowcontrol to RTS/CTS
4
Ring-Master