Rincent Minidyn V9, Руководство пользователя

Страница: 26 / 34

Rincent ND Technologies Minidyn User Manual Page 26
Figure 19 : Configuration tabs.
3.3.1 Modulus tab
This tab is used to choose the different algorithms and theirs parameters to obtain the
modulus.
Use the select button to choose a predefined configuration.
One a project is open, you can change the way the modulus is calculated and all the
measurements will be reprocessed accordingly.
3.3.2 Acquisition configuration
Number of drop per points:
Several drop of the weight are made for each measurement point:
- Set-up drop to ensure a good contact of the plate on the ground.
- Measurements drop that calculated modulus are averaged.
Parameter Default value
Set-up drops 1
Measurement drops 2
Tableau 5: Default values for the number of drop per point.