P a g e
|
4
1275 Leeds Ave, Suite 800 Ottawa Ontario, Canada K1B 3W2 -877-470-7480
Stand Alone
In standalone mode, all you need to control your LED light is a smart phone or tablet.
1. Make sure that the IP controller’s front switch is set to WIFI and then power up
the IP Controller, open up your devices wireless network page. On it you will find
all available wireless networks. Look for the WIFI SSID that starts with
“LEDnetXXXXXXXX” (the x’s are the IP controllers MAC Address.) (Figure 2)
2. Connect to that network using the default password “88888888”.
3. Open the Rimikon App, there you will see......... the same LEDnetXXXXXXXX
listed as an available device. (Figure 3) Press and hold it for 3 seconds to edit it.
4. Once you are on the Devices Edit screen, you can rename it, change its WIFI
SSID and change the password as well.
5. You can now control the Light.
WIFI Mode
In WIFI mode, you are linking the IP controller to your existing wireless network. To do
so, please follow the instructions below:
1. Make sure that the IP controller’s front switch is set to WIFI and then power up
the IP Controller, open up your devices wireless network page. On it you will find
all available wireless networks. Look for the WIFI SSID that starts with
“LEDnetXXXXXXXX” (the x’s are the IP controllers MAC Address.) (Figure 2)
2. Connect to that network using the default password “88888888”.
3. Open the Rimikon App, there you will see the same LEDnetXXXXXXXX listed as
an available device. (Figure 3) Press and hold it for 3 seconds to edit it.
4. Once you are on the Devices Edit screen, please take note of the MAC Address,
you will need in the next step. Rename the device to make it easier to identify it
later on. Below you will find a box asking to connect to existing WIFI network,
click on it, select the WIFI network you wish to connect to and insert the
password. Save and exit.
5. Unplug, wait 20 seconds and then replug the module. After it is finished booting
up, log into your routers settings page and assign the IP controller a static IP.
This is sometimes referred to as Address reservation. Please consult your
routers documentation to learn how to assign a static IP.
6. Complete steps 1-5 for each IP controller you want to control.
7. You can now control all your lights using the Rimikon App.
