Replace the USB hub on a DL5200
DL5200™
2000775_A
© 2007, Rimage Corporation
3
osition
the
left side panel
on the system.
.
4. Install the left side panel.
a. P
b. Insert
the
Torx T10 screws
(Qty. 10)
stem.
5. Connect
the
USB cable
to the back of the sy
6. Connect
the
power cord
to the power outlet.
The DL5200 is ready for use.
USB cable
Support information
Europe
When you contact Rimage Services, please provide:
Contact Rimage Services Europe:
/
Email:
support@r
•
Unit serial number and software version.
•
Functional and technical description of the problem.
or mess
www.rimage.com support.html
image.de
Tel:
+49-(0) 6074-8521-0
•
Exact err
age received.
US, Asia/Pacific, Mexico/Latin America
Contact Rimage Services:
www.rimage.com/support.html
Rimage Corporation reserves the right to make improvements to the
equipment and software described in this document at any time without
any prior notice. Rimage Corporation reserves the right to revise this
publication and to make changes from time to time in the content hereof
Email:
http://www.rimage.com/support_form.cfm
Tel:
North America: 800-553-8312
Asia/Pacific, Mexico/ Latin America: 952-946-0004
without obligation of Rimage Corporation to notify any person or
organization of such revisions or changes.
