6
THE SANDER MUST NOT BE PLUGGED IN AND THE POWER SWITCH
MUST BE IN THE OFF POSITION UNTIL ASSEMBLY IS COMPLETE.
GETTING TO KNOW YOUR SANDER
ASSEMBLY
Item Description
A.
Sanding Belt 1” x 42”
B.
Sanding Belt Tracking Knob
C.
Sanding Belt Table
D.
Sanding Belt Table Lock Handle
E.
Rubber Machine Feet
F.
ON/OFF Safety Switch
G.
Sanding Disc 8” PSA
H.
Miter Gauge
Item Description
I.
Sanding Disc Table
J.
Sanding Disc Table Lock Handle
K.
Sanding Disc Dust Port
L.
Sanding Disc Table Angle Scale
M.
Motor
N.
Sanding Belt Dust Port
O.
Sanding Belt Safety Cover
P.
Motor V-Belt Safety Cover
Unpacking and Clean-up
1. Carefully finish removing all contents from shipping carton. Compare the contents
of the shipping carton with the list of contents on the previous page. Place parts on a
protected surface for easy identification.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces.
Do not use
; gasoline, paint thinner, mineral spirits,
etc. These may damage painted surfaces.
4. Set packing material and shipping carton to the side.
Do not discard
until the
machine has been set up and is running properly.
A
B
H
I
J
F
E
D
C
P
O
N
M
L
K
G
Tools Required for Assembly:
#2 Phillips Screwdriver
