Rikon Power Tools 10-600VS, Руководство оператора

Страница: 3 / 17

Special Safety Rules For Scroll Saws
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
When using electric tools basic safety precautions should always followed to reduce the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product. Save theseinstructions for future reference.
•Keep work area clear. Cluttered areas and benches invite injuries.
•Consider work area environment. Do not expose tools to rain. Do not use tools in damp or wet locations. Keep work area well lit. Do not use tools
in the presence to flammable liquids or gases.
•Guard against electric shock. Avoid body contact with grounded surfaces.
•Keep other people away. Do not let others, especially children, not involved in the work touch or the power cord and keep them away from the
work area.
•Store idle tools. When not use, tools should be stored in a dry locked-up place, out of reach of children.
•Do not force the tool. It will do the job better and safer at the rate for which it was intended.
•Use the right tool. Do not force small tools to do the job of a heavy-duty tool. Do not use tools for purposes not intended; for example do not use
circular saws to cut tree limbs or logs.
•Dress properly. Do not wear loose clothing or jewelry that can be caught in moving parts. On-skid footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.
•Use protective equipment. Use safety glasses. Use face or dust mask if cutting operations create dust.
•Connect dust extraction equipment. If devices are provided for the connection of dust extraction and collecting equipment, ensure these are
connected and properly used.
•Do not abuse the power cord. Never pull the power cord to disconnect it from the socket. Keep the lead away from heat, oil and sharp edge.
•Secure work. Where possible use clamps or a vice to hold the work. It’s safer than using your hand.
•Don’t over reach. Keep proper footing and balance at all time.
•Maintain tools with care. Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing
accessories. Inspect power cables periodically and if damaged have they replaced by an authorized service facility. Inspect extension cables
periodically and replace if damaged. Keep handles dry-clean and free from oil and grease.
•Disconnect tools. When not in use, before servicing and when changing accessories such as blades, bits, cutters, Disconnect tools from the power
supply.
•Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on.
•Avoid unintentional starting. Ensure switch is in‘off’position when plugging in.
•Use outdoor extension leads. When the tool is used outdoors, use only extension leads intended for outdoor use and so marked.
•Stay alert. Watch what you are doing, use common sense and do not operate the tool when you are tired.
•Check damaged parts. Before further use of the tools, it should be carefully checked to determine that it will operate properly and perform its
intended function. Check the alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that
may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless
otherwise indicated in this instruction manual. Do not use the tool if the switch does not turn on and off.
•Warning. Repaired by a qualified person. This electric tool compliers with the relevant safety rules. Repairs should only be carried out by a
qualified person using original spare parts; otherwise this may result in considerable danger to the user.
ALWAYS CHECK FOR DAMAGED PARTS.
Before initial or continual use of the tool, a guard or other part that is damaged should be checked to
assure that it will operate properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other damaged parts should immediately be properly repaired or replaced.
ALWAYS DISCONNECT TOOLS
.
Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.
ALWAYS AVOID ACCIDENTAL STARTING.
Make sure switch is in “OFF” position before plugging in cord.
NEVER LEAVE TOOLS RUNNING UNATTENDED.