BR1
Dual Display Ampliier
Fiber cables fixing operation /
鵜聢演們χ苑
1. Insert the
ﾙ
ber cables /
彪エ鵜聢
* Open the protective hood and tilt the
ﾙ
ber lock lever to release the lock condition. Referring to the side seal of insertion position,
fully insert the
ﾙ
ber cables into the mounting holes until the limit. Pull the
ﾙ
ber lock lever back to lock the cables.
/
盲貞高緘妁逆碓汕コ鵜聢暁玖釘Ы偐戴瘻玖五哘
急苓鵜聢隙ト杲宅巡語彪エ嘩于促俑彪エ鵜聢
嘘茶鵜聢暁玖釘換
袖瘻玖
2. Pull out the
ﾙ
ber cables /
継к鵜聢
* Open the protective hood and tilt the
ﾙ
ber lock lever to release the lock condition. Pull the
ﾙ
ber cables straight out from the
mounting holes. /
盲貞高緘妁逆汕コ鵜聢暁玖釘
Ы偐戴瘻玖五哘
階ы継к鵜聢
2. Tilt the
ﾙ
ber lock
lever to release the
lock condition./
偐戴
瘻玖五哘鋤
4. Pull the
ﾙ
ber lock
lever back to lock the
cables./
瘻玖五哘
3. Insert the
ﾙ
ber
cables./
彪エ鵜聢
Insertion depth
12mm
/
彪エ砥崎
12mm
1. Open the protective
hood./
紬盲高緘廃訣妁
5. Close the protective
hood./
妁袖高緘廃訣妁
Unlock condition.
/
偐戴瘻玖五哘
Lock condition.
/
瘻玖五哘
Insertion position.
/
彪エ嘩于
Protective hood
/
高緘廃訣妁
Pull out direction./
継кχ曳
1. To protect the fiber cables from incorrect operation,
be sure to tilt the fiber lock lever to release the lock condition
before pulling out the fiber cables.
/
爾イ壜緘鵜聢 拔鋭監描酢
愃玖鵜聢暁玖釘爾偐戴瘻玖 嘘茶鵜聢継к
2. Pull up the protective hood forcefully may damage the fixing pin of the hood (
not exceed 180 degrees
).
/
胃キ曳サ換盲
高緘廃訣妁妙冩
180
°
ы奏離睇葦封妁柵語暁玖瘻
Fiber amplifier mounting/detaching operation: /
鵜聢隙ト杲塾冏演們
/
喬コ
1. Mounting/
演們
* To mount each ampli
ﾙ
er to the attached mounting bracket or DIN rail in sequence./
茶鑑ゑ茜急綮演們歌塾冏サ
2. Detaching/
喬コ
* To detach the ampli
ﾙ
ers in sequence by sliding the ampli
ﾙ
er bodies. Don't detach two ampli
ﾙ
ers at a time./
塁只位胥
茶急綮茶
映茜喬コ
Precautions for correct use : /
夷愃語求胃χ舷
* Be sure to mount ampli
ﾙ
ers to a DIN rail and use end units on both sides when more than two units are connected. Note the ambient
temperature when using in a sealed machine box./
櫓求胃妙冩
2
嘗隙ト杲酢耶求胃撕塾橡們鋭ゑ袖
鋭際煤枉愽ム鹸羅曠会瑠
崎聹Μ鋭Ы暁玖杲暁玖渠宅
* Be sure to turn off the power before wiring
ﾙ
nished./
鋭楕憖滑汚腰庵耶愃嫣匂傑琅剳五哘
*
Don't
operate the ampli
ﾙ
er in the same conduit as power cord or high voltage wire. Use separate conduit to avoid noise immunity and
malfunction./
隙ト杲册会酢ミы濡剳淋憖形兩袋剳汕憖疱妁京
耶赫廣京п廓殴癲捉形員詩癲捉
燵戒嫩只会
* Check the power cord to make sure the power supply matches the rated voltage./
涓指剳淋憖ЫΝ楕暁玖剳汕
* Connect the ground terminal to the ground when used with a switch./
求胃絢巡悩淡盲竈孱茶鎚詠埖鎚詠
*
Don't
use it outdoors or at a place where outside light can irradiate the receiver directly./
ミ獣鋭ο葦形葦球鵜醐鎚苓錠鎚奥
Claw tenon/
ΚКц嗅
DIN rail /
塾冏
DIN rail /
塾冏
Claw tenon/
ΚКц嗅
Sliding the ampli
ﾙ
er bodies /
位胥曳腰塁只
DIN rail /
塾冏
Detach the ampli
ﾙ
er
/
位胥峡к
www.csrimport.com
