1 Outline of the Product
Preface
- 3 -
1
1
Outline of the Product
Preface
Thank you for choosing our indoor oxygen monitor OX-600 (hereinafter referred to as the monitor).
Please check that the model number of the product you purchased is included in the specifications on
this manual.
This manual describes how to use the monitor properly and its specifications. Not only the first-time
users but also the users who have already used the monitor must read and understand the operating
manual and use this product as described in this manual.
Note that the contents of this manual are subject to change without notice for product improvement. It
is also prohibited to copy or reproduce this manual, in whole or in part, without permission.
Regardless of warranty period, we shall not make any indemnification for accidents and damage
caused by using the monitor.
Make sure to read the warranty policy specified on the warranty.
Purpose of use
This indoor oxygen monitor measures oxygen in the air and issues an alarm using the buzzer and
LCD backlight when oxygen concentration drops below preset concentration (alarm setpoint). While
displaying measured oxygen concentration on the LCD, the monitor converts it to an analog signal of
4 - 20 mA or 0 - 1 V to output (only 0 - 1 V for the dry battery type) and outputs a two-step gas alarm
contact at a gas alarm state.
The monitor is a safety unit, not an analyzer which performs quantitative/qualitative
analysis/measurement for oxygen. Check the specifications before use and conduct measurement
properly in accordance with purposes.
