Riken Keiki GD-F3A-SC-A, Руководство по эксплуатации

Страница: 8 / 24

6
３－２．Name of each part and functions
① Oxygen sensor : Galvanic type sensor to detect oxygen content.
② Sensor holder : This is a retainer to hold the oxygen sensor
(equipped filter inside).
③ Sensor lead : Lead wires for oxygen signal outputs.
④ Terminal strip 1 : Relayed terminal for sensor lead and external cable.
⑤ Cable gland : Entrance to lead the cable (φ8～φ11mm) from outside.
⑥ Hinge : Hinge for front door.
⑦ Lock : Lock for front door.
⑧Mounting hole : Mounting hole to fix this unit on the wall surface.
⑨Terminal strip 2 : Relayed terminal for input/output signal use to the signal converter.
⑩4mA adjusting hole : VR hole to adjust 4 mA of 4-20mA output(factory set)
⑪SPAN adjusting hole : VR hole to adjust SPAN
⑫ZERO adjusting hole : VR hole to adjust ZERO
⑬Front door : Front door for the unit
⑭Signal converter : Circuit unit to convert the sensor output into 4-20mA
⑮Protective earth bolt : Bolt for protective grounding.
⑬
⑨
⑩
⑧
④
⑥
⑦
①
②
⑤
⑮
③
⑭
⑫ ⑪