Riken Keiki GADMS Lite, Руководство по эксплуатации

Страница: 35 / 61

34/60
7-2-4 Loading the setup file to the Ewon Flexy 205
• Connect power supply to the Ewon Flexy 205.
• Remove the SD card for saving data from the Ewon Flexy 205 SD card slot (
③
), then
insert the SD card on which the setup file was added.
• The USR lamp (
①
, second lamp from top) starts to flash. Wait until the lamp is
continuously lit.
(Takes approximately one to three minutes.)
•
Once the lamp is continuously lit, remove the SD card. The Ewon Flexy 205 restarts
automatically.
•
After restart, wait until the T2M lamp (
①
, second lamp from bottom) lights up.
(Takes up to approximately five minutes.) Setup is complete once the lamp is lit.
•
After completing setup, insert the SD card for saving data.
• Don’t forget to reinsert the SD card for saving data after completing setup.