4 How to Operate
4-2. Operation
FP-300AGZS
- 22 -
4-2. Operation
When the power switch on the front panel is turned ON (l side), the gas monitor performs function check and
displays necessary information, and then enters detection state.
Power switch: ON
POWER/TROUBLE lamp: Lights up
continuously
For FP-300
Displays program version
Displays gas name to be
measured and full scale value
Alarm setpoint
Warm-up state (for 20 minutes)
If a detection tape is not
attached, the message
indicating a tape set error "TAPE
SET MISS" will be displayed.
Attach the detection tape
according to "6-3 How to replace
gas detection tape cassette".
Measurement standby state
Paper feeding for detection
Checking detection tape
(1) Gas name
(2) Gas concentration display
(3) Tape remaining amount
Measurement state
