|9
EN
8
7. EXTENDED OPERATING MODES - PELLETS / LOGS
Your combi stove features an automatic fuel recognition and a
combustion regulation. Operation may any time switch between
pellets and logs.
Note
It is imperative to use the feed rates as indicated in the instructions
manual of your stove, without any exception.
Note
During the whole period of log operation the functions of heating
time, room temperature and frost protection, as well as the external
request are disabled. These functions will not be re-activated
before
log operation has finished.
Correct heating up
Note
Do not use any flammable liquids to light up the fire!
Open the firebox door and place 2 small pieces of chipboard in
longitudinal direction to either side of the firebox floor.
Place 2 or 3 logs crossways onto the chipboard.
Now place more chipboard pieces crossways and add 2-4 ribs of the
RIKA firelighter on top of the chipboard. If necessary, some uncoated
paper can be placed under the chipboard instead of the firelighter.
Now set the RIKA firelighter (or the uncoated paper) alight and close
the firebox door.
Note
Be sure that the combustion trough is empty as the grid will tip
after the firebox door has been closed.
Tip
The RIKA firelighter no. E15834 is available from your RIKA dealer.
Automatic log operation
The automatic burn-off regulation shows the following sequence:
LOG CHECK
Your stove checks if logs have been placed.
LOG OPERATION / ECO OPERATION
Your stove ensures optimum log burn-off.
PLEASE RELOAD
Your stove indicates the time you should add more logs.
DO NOT RELOAD
Your stove reports that no ignition can be ensured after logs have
been added.
Eco Operation
For a small amount of fuel (partial load) you should use the
ECO OPERATION
mode. Under ‘Extended functions’, after closing the
firebox door you can switch to
ECO OPERATION
- the operating state
LOG CHECK
will change to
ECO OPERATION
.
Note
The
ECO OPERATION
mode is only possible after the first burn-off!
