RIHO Anna BZ79005, Инструкция по установке и эксплуатации

Страница: 13 / 124

EN
EN
EN
Whirlpool T LCD - Manual
IW00290.1
4.0 Controller
Do not touch, handle or use electrical devices when using the whirlpool. This is extremely dangerous to the user.
Screen indicators
The different indicators on the display depend on the options and system that you have. Below you can see a graphical
representation of the LCD display
In addition to the programming mode the other part of the display gives information on the status of your system. See
example below. You will see the icon turn white when the function is active. This applies to multiple keys.
Hydro active
(emergency) stop
- Cleaning function
- Run dry function
- Indication water level
Time indication Hydro
Music
Service Settings
Only for service
mechanics
Display temperature and temperature settings
Light or colour therapy
Bath is filled sufficiently
Bath is filled insufficient
Before starting the Whirlpool bath, fill the bath to 5 cm above the highest jet (hydro-system) and about 15 cm below the rim
when you have only an aero system. The bath indication will then show full.
Important:
As a protection, the system will switch off automatically after 20 minutes, unless the system is switched off manually in
advance.
When the whirlpool is inactive and you don't touch the LCD screen the screen will switch off after a minute. The LCD screen
will be off in sleep mode. When you touch the screen, a big Riho logo appears for a few seconds and will switch to the button
screen.
The screen will show only the buttons on the options available on your whirlpool (below you see an example).
4.1 Basic Functions
There are 2 possibilities to operate your bath.
- Use personal setting (see 4.
2 ).
- Use control unit by hand. You can touch the buttons on the screen to choose which function you want to put on or off.
You can easily switch off complete system with the (emergency) stop button.
User (settings)
In picture above you don't have the heating option and no hydro option. These buttons are automatically disabled/hidden.
Buttons can also be disabled/hidden when they can’t be activated e.g. when the tub is not filled sufficiently the Aero button
will also not be available.
Home Aero
Hydro inactive
-11- -10-