HAND SWITCH
SERIAL AND MODEL
NUMBERS ON
STICKERS
BACK OF RIGHT HAND COLUMN ASSEMBLY
6703 ZINSER ST., SCHOFIELD, WI 54476
PHONE: 800.298.4351 FAX: 866.882.9475
Monday−Friday 8:00 AM to 4:30 PM (Central)
www.raproducts.com
VERSION DATED: 10/8/12
K&A MANUFACTURING
PAGE 4 OF 4
NewHeights™ ELECTRIC HEIGHT ADJUSTABLE WORKSTATION OPERATION INSTRUCTIONS:
CAUTION! TO PREVENT PINCHING OR COLLISION, MAKE SURE THAT YOU, YOUR FINGERS,
AND OTHER OBJECTS ARE AT LEAST 3/4" FROM THE TABLE'S EDGES AND TRAVEL PATH.
STARTUP PROCEDURE:
PLUG THE POWER CORD FROM THE CONTROL BOX INTO A STANDARD 110 VOLT
RECEPTACLE. A POWER SURGE PROTECTOR IS RECOMMENDED.
THE NewHeights™ WORKSTATION IS NOW READY FOR USE. USE THE HAND SWITCH TO
ADJUST THE HEIGHT.
TROUBLESHOOTING:
IF YOU ARE HAVING ANY PROBLEMS WITH THE TABLE OPERATION, CONTACT RIGHTANGLE™
SERVICE AT 800-298-4351 OR [email protected].
WARRANTY INFORMATION:
NewHeights™ PRODUCTS ARE WARRANTED TO BE FREE OF DEFECTS DUE TO
MANUFACTURING OR MATERIALS AS FOLLOWS: 2 YEARS ON THE GEAR AND/OR MOTOR,
INCLUDING THE CONTROL BOX AND HAND SWITCH. 5 YEARS ON THE SUPPORT BRACKETS,
ALUMINUM COLUMNS AND FEET. WE WILL REPLACE ANY DEFECTIVE PART AFTER
INSPECTION BY AN AUTHORIZED AGENT. COSTS INCURRED DUE TO PRODUCT
REPLACEMENT SUCH AS INSTALLATION, LABOR CHARGES OR TRANSPORTATION ARE NOT
COVERED UNDER THIS WARRANTY. WHEN CORRESPONDING WITH RIGHTANGLE™
PRODUCTS, RECORD AND PROVIDE THE MODEL AND SERIAL NUMBERS LOCATED ON THE
BACK PORTION OF THE RIGHT HAND COLUMN ASSEMBLY. SEE THE DETAIL BELOW.
SPECIAL NOTE:
DO NOT USE ANY ABRASIVE CLEANERS ON THIS UNIT.
