3
1
12
2
5
Step 5
7
Page 6 OF 9
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Instruction # 53244
Step 5:
Slide one end of the main drive tube
12
onto the gear drive on the deflection gear
7
. Place
the left leg assembly
2
on the worksurface
1
guiding
the other end of the drive tube into the gear drive
near the top of the left leg assembly. Align the holes
in the worksurface support with the pilot holes in the
worksurface. Attach the leg assembly to the work-
surface with (4) wood screws
5
in the outside corners
of the worksurface support. Leave the screws loose
by about 1/8" as you did with the right leg assembly.
